Do it yourself
Life hacks, master classes, useful tips, recipes.
home » Different » Jewelry and costume jewelry » Creating an elastic band “Star”
Before you start creating this decoration you should prepare for work:

Making an Asterisk Rubber Band


Material:
- satin wide bright red ribbon.
- rubber.
- medium-sized beads in pink color.
- decorative sequins in the shape of small stars.
Tool:
- scissors.
- tweezers.
- lighter.
- a gun for working with hot glue.
- threads and needles for handicrafts.

Sequence of work.

1 Making petals.
For the petals you will need 10 pieces measuring 5x5 cm. Since the width of the prepared tape is already 5 cm, all you have to do is cut the required length. Then from each square you need to get a triangle by folding it in half. And then fold the part in the middle again.

Making petals


Holding the resulting triangle with tweezers, you need to thread the sewing thread through the needle and make a small stitch along the edge of the longest side of the part. The needle should pierce all the folds and connect them together. The cuts should be 3 mm apart. Once you have made the stitch, you do not need to cut the thread.

Making petals


After this, you need to pull the thread of the seam so that the material gathers into uniform folds. Once you've done this, you can sew two locking stitches and trim the thread.

Making petals


Next, you need to burn the sections of the resulting part with a flame to protect the part from shedding the fabric.

Making petals


This is what your petal should look like. You need to make the same copies from the remaining squares.

2 Flower connection.

The flower consists of two rows, each of which is created separately. You need to make a small circle out of five petals, smearing glue on the parts along their side.

Flower connection


With this action you have completed the first row. Next, the remaining parts need to be glued to the bottom of this circle. But you should place the petals in the spaces between the parts of the first row.

Flower connection


Next you need to glue the beads in the center of the flower to hide the place where the petals are glued.

glue the beads


Next you need to carefully glue three decorative stars along the edge of each petal. This must be done carefully so that the glue does not get on other parts of the petals, ruining their beauty.

Making an Asterisk Rubber Band


Now you need to turn the flower over and attach an elastic band to its center.

attach an elastic band


The flower is completely ready, congratulations!
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (0)

How to assemble speakers from MDF

Computer chair reupholstery | Do it yourself

How to make a stump pot from a bucket and rags with your own hands

Do it yourself - crafts and master classes | Page 182

«Do it yourself - with your own hands» - a site of interesting homemade products made from scrap materials and items at home. Step-by-step master classes with photos and descriptions, technologies, life hacks - everything a real master or just a craftsman needs for needlework. Crafts of any complexity, a large selection of directions and ideas for creativity.

We recommend reading

Washing machine error codes