Do it yourself
Life hacks, master classes, useful tips, recipes.
home » Homemade cars » Simple and powerful foam generator from a fire extinguisher
Homemade foam generator for car washing

Cheap home mini car washes have an insufficiently effective foam nozzle. As a result, even good non-contact foam copes poorly with dirt. You can improve the quality of cleaning your car by using a homemade foam generator. It copes with stubborn dirt, which can later be easily washed off with a mini-wash.

Materials:


  • body from an old powder fire extinguisher with neck and lid;
  • 1/2 inch steel tube;
  • a piece of rubber from the chamber for the seal;
  • garden hose;
  • garden hose nozzle;
  • ball valve 1/2 inch;
  • quick-release adapter fitting to compressor M1/2 inches;
  • fumlenta.

Homemade foam generator device


Powerful foam generator from a fire extinguisher

The foam generator is made using a meringue powder fire extinguisher or an old hand-held steel spray gun. You can use another metal container of 8-10 liters. It must be equipped with a neck with a threaded cap and a rubber seal.
Powerful foam generator from a fire extinguisher

A hole is made at the top end of the container for a 15 mm tube. It will be used to release foam. A short piece of pipe 7-10 cm is welded into it. A thread is cut on it to secure the adapter to the garden hose.
Powerful foam generator from a fire extinguisher

A hole for the tube is drilled on the side of the bottom of the cylinder. It will be used to supply air. A plugged pipe with side holes is inserted into it.
Powerful foam generator from a fire extinguisher

10 holes drilled in a row with a 2 mm drill are enough. The tube is welded so that they look up. Next, a thread is cut on it to secure the ball valve. The compressor hose fitting is screwed onto it. All threads are pre-sealed with fumlente or another method.
Powerful foam generator from a fire extinguisher

How to use


Fill the foam generator about halfway with water. Car shampoo is added to it for contactless washing. The tank is closed with a lid. A compressor is connected to the lower adapter.
Powerful foam generator from a fire extinguisher

A garden hose is connected to the top fitting.
Powerful foam generator from a fire extinguisher

Wide tube for spraying foam.
Powerful foam generator from a fire extinguisher

After turning on the compressor and opening the ball valve, the supplied air mixes the water, creating foam.
Powerful foam generator from a fire extinguisher

It rises to the top of the tank and, after it is filled, moves along the garden hose, splashing out onto the car.
Powerful foam generator from a fire extinguisher

Powerful foam generator from a fire extinguisher

A foam generator of this design works much better than many standard attachments for a mini-wash. It makes a thick foam, which, when using normal shampoo, allows you to wash even a very dirty car with minimal time and effort.
Powerful foam generator from a fire extinguisher

At the end, we wash everything off with water from a high-pressure washer or from a garden hose under normal pressure.
Powerful foam generator from a fire extinguisher

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (7)
  1. Guest Andrey
    #1 Guest Andrey Guests April 9, 2019 08:22
    2
    Simple, but not simple. Where can I get a compressor? And so very good. good idea, I’ll buy a compressor and make one for myself.
  2. Chief
    #2 Chief Guests April 10, 2019 10:11
    0
    If you insert a mesh or any other filler into the air supply tube to cut the air flow, you will get thicker foam at the output and, accordingly, lower consumption.
  3. Ivan
    #3 Ivan Guests 12 April 2019 15:18
    1
    Why such a bother, buy a foam concentrate for Karcher
  4. Guest Nikolay
    #4 Guest Nikolay Guests 22 March 2020 16:55
    2
    class
  5. Guest Nikolay
    #5 Guest Nikolay Guests March 27, 2020 11:48
    1
    Well, man, if you deceive me, it will be offensive, I’ll do it at your prompting
    1. Guest Nikolay
      #6 Guest Nikolay Guests 28 June 2020 17:59
      4
      Did you end up with a foam generator or just a so-so idea?
  6. Guest Andrey
    #7 Guest Andrey Guests 11 August 2020 12:05
    2
    good idea! What pressure is set on the compressor?

Crossbow from stationery | Do it yourself

Clay horse | Do it yourself

DIY rugs

How to sew a developmental cube for a baby | Do it yourself

«Do it yourself - with your own hands» - a site of interesting homemade products made from scrap materials and items at home. Step-by-step master classes with photos and descriptions, technologies, life hacks - everything a real master or just a craftsman needs for needlework. Crafts of any complexity, a large selection of directions and ideas for creativity.

We recommend reading

Washing machine error codes