For work you will need materials:
1. A bottle of champagne.
2. Alcohol and cotton pad.
3. White and gray acrylic paints.
4. Wide flat brush.
5. Fan type brush.
6. Decoupage napkin.
7. PVA glue.
8. Glue gun.
9. Semolina.
10. Decorative snowflakes.
11. Decorative mesh.
12. Glitter nail polish.
13. Acrylic varnish.
14. Ribbons.
Decoupage champagne bottle
1. First of all, you need to remove the labels from the bottle. To do this, lower the bottle into a container of water. After some time, remove the labels from the bottle and let the glass surface dry.
2. Then degrease the bottle with alcohol.
3. Let's start priming the bottle. To do this, use a wide brush and white acrylic paint. Apply paint in one layer.
4. Since the surface of the bottle is still visible, it is necessary to apply the next layer of paint.
5. To make the surface of the bottle perfectly snow-white, you can apply several more layers of paint. Most often, 3 layers of soil will be enough.
6. The soil must be completely dry and then you can start decorating the bottle. The main decorative element will be a decoupage napkin. Using the tearing method, we extract the pattern from the napkin. Then we remove only the top layer of the napkin on which the drawing is located.
7. Apply PVA glue to the place where the napkin with the pattern will be located.
8. Place the napkin on the bottle and gently smooth it out.
9. Cover the top of the drawing with glue.
10. Let the drawing dry and do the same work on the back of the bottle.
11. Next we make an imitation of snow. To do this, mix semolina, PVA glue and acrylic paint in a small container. You should get a thick mass. Using a cotton swab, apply the semolina mixture at the bottom of the picture.
12. Make ice drops at the top of the bottle (from the neck to the shoulders). In this case we use hot glue.
13. Ice drops must be painted white so that they completely merge with the general background.
14. Next you need to select the drops. To do this, paint the volumetric parts of the drops with a thin layer of gray paint.
15. Fill the free space between the drawings with the help of decorative snowflakes.
16. Then we paint the snowflakes with shiny varnish. Then we cover the entire bottle with acrylic varnish.
17. Let's start decorating the neck. Take a wide white ribbon and fasten it to the neck.
18. Make one bend on one side of the tape and fix it in the center. Thus, we perform 2 more bends. Each bend should be smaller than the previous one.
19. On the opposite side we perform similar work. We cut the end of the ribbon and glue it in the center of the bow.
20. Make a bow from a thin red ribbon and attach it in the center of the white bow.
21. Attach several curls of red ribbon around the bow. We also decorate the bow with decorative mesh.
22. A bottle of champagne is ready for the holiday!
Decor bottles takes little time, but the result of the work will definitely bring a lot of positive emotions.
