If the roof begins to leak, it is not necessary to replace the broken sheets with new ones. A hole in any roofing material can be easily and quickly repaired using a universal method. It is very reliable, fast, cheap and simple.
Materials:
textile;
petrol;
xylene;
Styrofoam.
The process of making adhesive and repairing a roof
To make repair glue, you need to take a small amount of gasoline into a glass container and dissolve pieces of foam plastic in it.
The latter is thrown in until it begins to dissolve slowly. Then a little xylene is added to the jar.
You need to mix the glue and bring it to the consistency of jelly, adding polystyrene foam or, conversely, adding more solvent.
After preparing the glue, you need to make reinforcing patches from rags. The fabric is cut into pieces of suitable size.
Holes on the roof are cleaned with a metal brush.
Glue is applied on top with a brush, and the first patch is glued.
Then it is coated on top, and the next flap is applied.
3-4 layers are enough to reliably and permanently seal the hole.
The gasoline and solvent will evaporate, leaving the patch hard and strong.
It will not let water through, and will withstand more than one winter without any problems.
