Do it yourself
Life hacks, master classes, useful tips, recipes.
home » Useful and interesting » How to cut a glass bottle
Today, “Hand Made” creativity is gaining more and more momentum every day. Very often, handicraftsmen use glass bottles in their creations. They are used to make vases, lamps, stands, etc.
I'll show you a very simple way to cut a bottle evenly in almost a few seconds.
How to cut a glass bottle

All we need is nichrome wire, a 12 V battery and cold water.
How to cut a glass bottle

How to cut a glass bottle

Cutting the bottle


First you need to determine the location of the incision. To make it even, take a piece of paper and wrap it around the bottle. Align the edges of the sheet so that the line is straight. Then take a felt-tip pen or marker and draw a border along the edge of the piece of paper. Now the leaf can be removed.
How to cut a glass bottle

How to cut a glass bottle

Next, you need to take a piece of nichrome wire with a diameter of 0.5 mm and attach one end to a stationary object. For these purposes I use a black weight. We immediately attach one wire from the battery to it.
How to cut a glass bottle

We make a loop around the bottle. And we align it along the mark from the marker.
How to cut a glass bottle

To avoid getting burned, take the wire with pliers. We tighten it just a little so that the wire is aligned.
Apply voltage to the second end of the wire.
How to cut a glass bottle

How to cut a glass bottle

It can be seen that the wire is hot.In places of contact with the bottle, the wire does not completely turn red, since the bottle takes away heat.
How to cut a glass bottle

We wait without moving the wire and holding it under tension for about 30 seconds.
Then we quickly remove the wire and spray the heating area with water. You can also prepare a bucket of water and dip the bottle in it.
How to cut a glass bottle

You will hear a peculiar click of the glass, and the bottle will burst exactly along the line where the nichrome wire passed.
How to cut a glass bottle

The explanation is simple: when a certain place is heated in the glass, internal stress arises. After sudden cooling, the surface of the glass cools sharply, but its interior remains heated. As a result of such a sharp change, microcracks appear, which instantly turn into splits.
How to cut a glass bottle

This trick can be done not only with round bottles, but also with square, oval, etc.
How to cut a glass bottle

How to cut a glass bottle

How to cut a glass bottle

If the bottle does not break off after drinking water, then simply grab it by the neck and press slightly. Everything must fall away.
How to cut a glass bottle

All irregularities and sharp edges after cutting can be processed with fine sandpaper.
When working with glass, be very careful not to cut yourself. Be especially wary of small fragments and take all necessary measures to avoid their spread.

Video on how to cut a glass bottle


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (6)
  1. Duche
    #1 Duche Guests 9 November 2017 17:20
    5
    I read it somewhere. During the Civil War, glasses were made from bottles. A harsh thread soaked in kerosene was wrapped around a bottle, set on fire, and then into a bucket of water. I tried it, it works.
  2. Alexander
    #2 Alexander Guests 9 November 2017 20:32
    4
    Instead of nichrome wire, use copper wire. Press one turn tightly to the intended place on the bottle (twist it with pliers), one end of the wire, or both, leave longer to heat (gas, candle, etc.) for 1-3 minutes. Further into cold water. The result is similar, only without the weight and battery.
  3. Guest Sergey
    #3 Guest Sergey Guests 9 November 2017 20:53
    2
    In the 80s, a similar thing was done, but with the help of a cord, friction and water. The result is the same
  4. Arkady
    #4 Arkady Guests November 14, 2017 12:50
    4
    In the early 1970s, there was a craze for placing various objects in bottles. How I cut bottles using a rope soaked in cologne.
  5. Oltaviro Oltaviro
    #5 Oltaviro Oltaviro Guests November 18, 2017 11:15
    4
    The coil will not heat up. Short circuit at the point of contact.
  6. Svetlana
    #6 Svetlana Guests November 28, 2017 02:13
    0
    And from this glass you can do this:
    [media=https://youtu.be/eph7sz5Obxw]

Embroidery patterns | Do it yourself

How to cheaply and environmentally get rid of weeds between paving slabs without unnecessary stress with your own hands

Life hack: washing with laundry liquid soap is an excellent alternative to washing powders

Crafts - Do it yourself, step-by-step master classes | Page 35

«Do it yourself - with your own hands» - a site of interesting homemade products made from scrap materials and items at home. Step-by-step master classes with photos and descriptions, technologies, life hacks - everything a real master or just a craftsman needs for needlework. Crafts of any complexity, a large selection of directions and ideas for creativity.

We recommend reading

Washing machine error codes