Materials and tools:
- soda ash;
- white;
- latex gloves;
- old toothbrush;
- capacity;
- viscose napkin;
- cotton pads.
Remove mold and mildew permanently
In any unnecessary container you need to prepare a mixture of soda ash and bleach. Since bleach contains chlorine, everything is done with gloves. You need to be prepared for the persistent smell of the product, so ideally work when you plan to leave the house for a couple of hours. First you need to dial 5-7 tbsp. spoons of soda and mix them with white.
The result should be a paste with the consistency of thick sour cream.
The prepared gruel is applied with a toothbrush to mold-affected surfaces. The composition is able to immediately remove growths that could not be eaten. Primarily from the surface of tiles, paint, plastic. It is convenient to apply the mixture with a brush and rub with a hard viscose cloth; in some cases, you can use a dish brush.
If mold and mildew have eaten into the tile joints or plaster, then a mixture of soda ash and bleach will be ineffective. In this case, after cleaning from coarse growths, you need to soak cotton pads in concentrated whiteness and apply them to the affected areas overnight or at least for several hours.
After this time, the chlorine present in the white will kill the fungus and lighten it. He will become completely invisible. It is possible that some of the affected areas will remain dark, but only because the moistened cotton pad did not fit tightly into these areas. You can try to wipe them off again with soda ash, and if that doesn’t help, then repeat the procedure with cotton pads and whitener.
The proposed method of combating mold and mildew only allows you to remove the growths, but if the issue of dampness is not resolved, they will appear again. You need to install an electric hood in the bathroom; if the problem is on the slopes in the other rooms, then a ventilator or dehumidifier will help.