Usually plastic sticks incredibly poorly, if at all. There is a surefire way to comma it without unnecessary complications. To do this, you do not need additional rods of such plastic.
For example, if you have a cracked plastic container, you can very easily seal it yourself; you don’t need anything scarce for this.
Will need
- A piece of metal mesh.
- Metal scissors.
- Soldering iron.
- Gas-burner.
- Screwdriver.
How to solder plastic
We cut the mesh with metal scissors to the size of the crack in the barrel. On the sides approximately plus one centimeter.
We position the mesh along the length of the crack. We melt the initial part with a soldering iron.
Next, we take a gas burner and gradually fuse the mesh into the body of the barrel.
When the entire mesh is fused, we smooth the surface with a heated screwdriver.
A simple repair has been completed.
Now the plastic barrel is airtight and securely sealed. The mesh provides excellent reinforcement and resistance to stress. The glue method cannot achieve such strength.
