What you will need:
- flat screwdriver;
- scissors;
- PET bottle.
Mosquito net handle repair process
First you need to dismantle the old broken handles. To do this, you need to use a screwdriver to pick up the rubber seal on the mesh frame near them and pull it out to a width of 10-15 cm. The broken handles are removed from under it.
New handles need to be cut from the walls of PET bottles. You should use a flat part of the bottle without relief. It is desirable that the plastic be thicker, so a 5 liter bottle or more is ideal. 2 identical tongue-shaped handles are cut out of it.
Next, the new handles are placed under the rubber seal, and it is pushed into place.
As a result, the tongues will bend and lock onto the frame.
PET handles are not afraid of sunlight, due to which they will last much longer than store-bought ones. They are practically invisible, so this alternative is the most successful.