What you will need:
- mounting knife;
- screwdriver, nail or pencil;
- ruler.
The process of measuring diameter and calculating cross-section
If you are checking a wire, you need to strip its core of insulation.
Next, it, wire or fishing line is wound around any thin rod. The winding is carried out tightly turn to turn without gaps. You need to make 10-20 revolutions.
To determine the diameter, you need to measure the width of the winding with a ruler. The resulting value in millimeters is divided by the number of revolutions made. In the example, 10 turns are 4 mm wide. Thus, the wire diameter is 0.4 mm.
Knowing the diameter, you can calculate the cross section using the formula for the area of a circle:
Since the radius is half the diameter, in this case it is 0.2 mm.Using the above formula, you can calculate the actual cross-section of the wire; it is 0.1256 sq. mm.