What you will need:
- powder stain remover;
- dishwashing detergent;
- alcohol;
- glass cleaner;
- brush;
- washing vacuum cleaner.
The process of preparing the product and cleaning the rugs
A measuring spoon of stain remover is poured into an empty bottle.
Then add 2-4 tbsp. dishwashing detergent.
It gives good foam and also dissolves fat. Also pour in 3 tbsp of alcohol and 6 tbsp. glass cleaning products. All this is topped up with hot water to get a volume of about 2 liters.
A hole is made in the cap of the bottle with the product, then through it the composition is gradually poured onto the dirty rugs. Immediately you need to go over them with a stiff brush, the harder and longer, the better.
If the mats are very dirty, then after the foam has formed, you need to let them stand for a couple of hours without allowing them to dry out. Then you should brush again and collect dirty water and foam with a washing vacuum cleaner.To ensure that all the dirt is gone, you can add a little water, washing out the heavy sediment so that it can be sucked up with a hose.
After washing, the car doors should be left open, so the mats will dry faster.
Watch the video
We recommend that you read how to make a cheap penetrating cleaner for cleaning the interior - https://enn.washerhouse.com/6985-kak-sdelat-kopeechnoe-sredstvo-dlja-chistki-salona-avtomobilja.html