To create a holder for paper towels we will need: the remains of a wooden board 2 cm thick, thick steel wire, 10 self-tapping screws, an angle grinder, a grinding attachment for an angle grinder, a drill.
1. Cut a rectangle from the board with dimensions 33 by 10 cm.
2. Cut out 2 rectangles 10 by 12 cm. Using a grinder, cut off one corner and make it rounded.
3. We put a sanding attachment on the grinder and grind the parts to perfect smoothness.
4. Take a piece of wire 36 cm long. We wrap one edge so that we get a hook.
5. Now we assemble all the elements of the holder. Using self-tapping screws, we attach the sides to the back wall.
6. Using a drill with a drill of a thickness equal to the thickness of the wire, we drill holes in the side walls.
7.In the back wall we drill three non-through holes approximately to the middle of the thickness of the board.
8. We thread the wire into the holes in the side walls.
9. We insert three self-tapping screws into the previously made holes and use a drill or screwdriver to screw them into the wall.
10. Here is our holder and ready. All that remains is to put on a roll of paper towels. To do this, take out the wire from one side, put on the roll and thread the wire through the side wall again.
A paper towel holder is most often mounted on the wall near the sink, but you can also find a place for it near the stove. It is very convenient to use, firstly, because the towel is always at hand, and secondly, because by tearing off one towel, you will never stain another.
