Material
I needed spruce boards: four 18x150 mm in size for the frame and two 44x94 mm in size for the steps.
The staircase is A-shaped, with 5 steps on each side.
Making a folding ladder
We adjust four boards to the same length.
The base consists of four boards: two on one side, two on the other. The distance to which the legs of the ladder will move apart can be determined experimentally. After this, you need to use a construction protractor to draw out the corners and saw them off at the top and bottom of the boards. This is necessary so that the legs and upper platform of the open staircase are parallel to the ground.
After the staircase frame is ready, it comes to the steps. I cut them from a thick board.
The angle of attachment is the same as at the base. I fasten everything with self-tapping screws and pre-drill a hole for each one so that the wood does not crack.
Everything was previously marked for steps on each board.
Once both sides of the ladder are assembled, you need to connect them together. They are fastened with two loops.
To prevent the legs from moving apart when using the stairs, we make limiters from a metal chain.
Everything will be ready in a year, we will test our stairs on a flat surface. If necessary, the product can be painted or varnished.
This item will be indispensable in any home. The sizes can be absolutely any to your taste. The most important thing is that the design is very stable and relatively lightweight.
Also, for longer use, it would not be superfluous to cover the legs of the stairs with metal. This will save them from splitting and getting wet if something happens.
See you again!
