Do it yourself
Life hacks, master classes, useful tips, recipes.
home » Electronics » What can be made from a microwave motor
What can be made from a microwave motor?

A large number of used microwave ovens can easily be found in any landfill. One of the valuable parts that can be removed from a microwave oven is the plate drive motor.
This is a 220 V synchronous electric motor with a gearbox inside the housing. On its basis you can make a lot of homemade products and four ideas will be given below.
If you do not have this motor in stock, you can simply purchase it at Aliexpress for a small price.

220V pocket generator


From this engine you can make a fully functional 220 V alternating current generator. You can use it to light an LED lamp, charge a mobile phone, etc.
What can be made from a microwave motor?

It’s done simply: a lever is screwed to the crosspiece on which the plate lies in the microwave. In this case, it is the body of a stationery knife. At the end of the lever, a handle for rotation is made from a bolt.
We install the crosspiece on the motor and rotate the handle. High speed is not required. Any necessary load is connected to the terminals.

Gravity Generator


This generator is suitable for short-term lighting.
What can be made from a microwave motor?

Its essence is this: a rope is wound around the motor shaft from a microwave oven.A bottle of water is tied to the end and serves as a weight.
We release the bottle and it gradually falls down, the rope unwinds due to the fact that the shaft rotates.
The load is an LED lamp. The glow time of such a generator depends on the length of the rope. Approximately 30 seconds.

Rotating stand


It is impossible to make a high-quality 3D photo shoot or video of a 360-degree view of goods, cakes, and things without a rotating stand. It can be made simply on the basis of an electric motor and two round wooden stands.
The motor is screwed into one.
What can be made from a microwave motor?

And the other lies on top and rests on the engine shaft.
What can be made from a microwave motor?

Everything rotates very smoothly, everything is as it should.

Grill drive


Automatically cooking grilled chicken over a fire will be much easier with this drive, which can be made from a microwave motor.
What can be made from a microwave motor?

No bearings required. The skewer has two supports on the sides, one of which is connected to an electric motor for rotation.

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (4)
  1. Guest Yuri
    #1 Guest Yuri Guests 27 August 2019 17:19
    11
    The author forgot to add that deposits of microwave ovens are located in British landfills. Our microwave disappears from the container in 15 minutes, I checked it personally.
  2. Ed
    #2 Ed Guests 28 August 2019 19:51
    2
    I have 2 motors lying around. For some reason one is 12 volts, the other is 27 volts...
  3. Guest Alexander
    #3 Guest Alexander Guests September 1, 2019 00:50
    1
    I have an Electra 1001 from a grill from a Soviet stove. Bulky, yes. But 4 rpm at 220V. Its power is enough to turn a spit for 4 chickens for a large grill.

    And about the landfills... They are all in China. Once Ali and I were sent a used magnetron with the inscription Goldstar. Apparently from a native Korean microwave. Because in the rest of the world, since 1996, the name LG has been rebranded. But nothing, the magnetron is working.
  4. MIHAIL
    #4 MIHAIL Guests 14 November 2020 07:02
    1
    You can’t get 220 volts; the current is tiny; the gearbox will go back, but not for long - the gears are not designed for a force of 178-213 Newtons - they will simply crumble.

Do it yourself - crafts and master classes | Page 341

Master class on making decorative bricks using ceiling plinths with your own hands

Original box | Do it yourself

Do-it-yourself installation of drywall to the wall

«Do it yourself - with your own hands» - a site of interesting homemade products made from scrap materials and items at home. Step-by-step master classes with photos and descriptions, technologies, life hacks - everything a real master or just a craftsman needs for needlework. Crafts of any complexity, a large selection of directions and ideas for creativity.

We recommend reading

Washing machine error codes