What you will need:
- battery 12V;
- copper wires with a thick core;
- AA battery;
- alligator clip.
Manufacturing process of portable welding machine
A graphite rod from a AA battery will be used as an electrode for welding. You just need to disassemble it and remove it.
Next, prepare 2 pieces of copper wire with a thick core. The thicker it is, the higher the current transmission and welding efficiency. The sections should be short to minimize drag. Their edges are stripped of insulation. The wires are attached to the battery terminals.
A graphite rod is wound onto the wire connected to the “+” terminal. A clamp is installed on the second one.
To use welding, you need to attach the clamp to the parts being welded. Then, by touching them with a rod, you can melt the metal, fusing the workpieces together. The pressure is applied for a couple of seconds so as not to overheat the battery. Since the rod gets hot, it should be held with pliers. You can cook on a small battery for a couple of minutes, then the battery will run out.
Watch the video
You will probably also be interested in the article on how to weld aluminum without argon, we recommend reading it - https://enn.washerhouse.com/4456-svarivaem-alyuminiy-bez-argona.html