A simple life hack that will take you a maximum of 5 minutes. What will I do? Change the cap on your conditioner bottle.
I typically buy fabric softener in a soft pack or bottle. Both options are inconvenient for me.
From soft packaging It’s not clear how much conditioner you poured in, because you need to do it quickly in the final rinse mode. In addition, the 1.5-liter bag constantly tries to dodge to the side, which risks spilling liquid on the floor.
Important! Many washing machines drain the fabric softener in the middle of the wash cycle, so by the end of the wash you won't notice the smell or softness of your laundry. But the most important thing is static voltage; it does not disappear in this situation.
So, after the entire washing cycle, you have to set the rinse mode again, but with conditioner. And, if you are lucky enough to “catch the treasured numbers” on the last fill of water, you can save not only water, but also electricity.
But I won’t digress from the topic.
How to make a convenient lid for fabric softener
Plastic bottle with conditioner. It is convenient because the softener can be poured into the lid and then poured into a special compartment of the machine. But there are also disadvantages here. Remains of the conditioner flow down the bottle and leave stains on the tiles, which children can accidentally crawl over while playing.
To eliminate all the inconveniences of using air conditioning, I came up with the simplest way.
I remove the cap with the dispenser from the drinking water and put it on the conditioner bottle.
By the way, they match perfectly in size.
Now the conditioner flows in doses, and the top cap closes tightly, and the bottle remains clean.
A simple life hack in which you don’t need to invent anything special, I was 100% satisfied with it, I hope you will like my method.
