You can make a very practical and extremely useful dryer yourself from a piece of polypropylene pipe. It will take just a few minutes to make and your battery will be endowed with a truly desired function.
You will need:
- A piece of polypropylene pipe the length of your battery. Plus 3-4 cm for making holders.
- Holders for PP pipes (clips) - 3 jokes.
- Self-tapping screws - 2 pieces.
Making a simple battery dryer
We take the pipe and, using special scissors, cut off a piece of 3-4 cm. Next, cut it lengthwise.
We drill each half.
We also drill out the clip to suit the thickness of the screw.
Using a self-tapping screw, we connect the clip with a half piece of pipe. We don’t finish it all the way.
We insert the resulting holder through the gap in the radiator walls to the required height. We fix it by tightening the self-tapping screw.
We will install the same holder on the other side of the battery. Next, install the pipe by simply snapping it into the clips on both sides.
The dryer is ready. The holders hold perfectly and do not damage the radiator.
If you make such a useful thing in the kitchen, your hostess will definitely appreciate it.
High-quality and durable drills on AliExpress at a discount - http://alii.pub/5zwmxz
