To make the tape you need:
• Ritual ribbon is 1.5 - 2 meters long and approximately 20 cm wide. It can be bought in a ritual or regular store in the “Fabrics” section. If you can’t buy ready-made tape, you can replace it with regular curtain fabric, cut into wide strips and hemming the edges.
• Large canvas.
• Floss threads.
• Embroidery needle.
• Hoop.
• Scissors.
Preparing the embroidery. To do this, you need to choose an Easter-themed embroidery pattern.
Other schemes can be selected. To make it easier to follow the pattern, mark the canvas with bright threads, 10 x 10 squares.
To tape on a white background embroidery stood out well, the threads for it should be chosen bright.If the threads in the diagram are light, you can make the replacement yourself.
Embroider the work according to the pattern. This pattern will be attached to 1 end of the tape. There is no need to process the edges of the canvas. You can even pull out 10 - 12 outer threads, making the edges terry.
For the other end, embroider a cross according to the pattern.
To make the cross look brighter and more impressive, the middle can be embroidered with yellow thread with lurex, and the edges can be trimmed with regular yellow thread a tone or 2 higher. On this embroidery, the edges can also be fluffed.
Iron the embroidered blanks, place them on both ends of the ribbon and carefully sew them on, masking the ends of the threads.
The ribbon will be an excellent decoration for the graves of loved ones. This is a great alternative to the usual artificial flowers. It can be tied to a cross or a monument. It will not be blown away by the wind or washed away by the rain.
