For work you will need: fleece in yellow, orange, green, black, white and pink, cotton fabric, thread, scissors, needle, paper, felt-tip pen.
Operating procedure.
- First you need to make a pattern. To do this, you need to measure the height and width of the teapot. Draw a pattern on paper, the width of which should be equal to the width of the teapot multiplied by 1.5, and the height should be equal to the height of the teapot plus 6 centimeters.
For example, if the width of the teapot is 22 centimeters, then the width of the pattern should be 22 x 1.5 = 33 centimeters. If the height of the teapot is 20 centimeters, then the height of the pattern is: 20 + 6 = 26 centimeters. This will be the pattern of the main part.
Cut out the pattern of the main part from paper. Place it on the fabric and trace it with a felt-tip pen.
Cut two pieces from yellow fleece (for the outer part of the heating pad).
On one of the main parts, cut out of yellow fleece, decorate a muzzle. To do this, cut out parts for the eyes from colored scraps: two parts each in white, green and black. And cut out the pink fleece nose.
Carefully sew on the pieces using a sewing machine using a zig-zag stitch or by hand using a buttonhole stitch.
Use pink thread to decorate the cheeks; to do this, embroider a strip down from the sock about 3 cm long.
Cut out four triangles from orange fleece - these will be the cat's ears.
Sew them in pairs on both sides, leaving one side unsewn. Turn out the ears.
Place the piece with the muzzle right sides together with the other main piece of fleece and sew it together, carefully sewing in the ears. Turn out.
Cut two main pieces from cotton fabric (for the inside of the heating pad).
Sew the inside of the heating pad. To do this, fold the parts cut out of cotton with the right sides and carefully sew along the edge with a line stitch by hand, or stitch on a sewing machine.
Place the inner part of the heating pad into the outer part and sew along the edge, leaving a small area unsewn.
Turn the heating pad through the unstitched area. Carefully sew up the unstitched hole by hand.
The teapot warmer is ready, it will help you brew tea.
And to make it tasty and aromatic, you need to remember a few rules for brewing it.These are the rules:
- Boil water.
- Prepare a teapot. Before pouring the tea leaves, rinse it with hot water.
- Pour the tea leaves with a dry spoon.
- Pour hot water over 1/3 of the teapot and leave for two minutes.
- Fill the kettle with hot water to the top and cover with a heating pad to brew tea. Let it brew for 3-5 minutes.
Enjoy your tea!
A funny, homemade cat warmer will not only help you brew delicious tea, but will also cheer up your whole family every morning.
