The Su-34 aircraft is a legendary combat vehicle that has served the Russian army as a fighter-attack aircraft for several decades. In this master class, we will make a model of this aircraft that can be flown, or simply used as a souvenir.
To make the model, we need:
1. Ceiling tiles.
2. Polystyrene foam up to 20 mm thick.
3. Glue "Dragon".
4. Stationery knife.
5. Sandpaper.
6. Marker.
7. Plasticine.
First, let's make parts from ceiling tiles. To do this we need to draw them and cut them out.
It is important to note that the dimensions of the parts in this case are not important, however, proportions and symmetry should be maintained as in the photograph.
Unlike the hull (1) and fins (2,2*), the air intakes (3,3*) need to be glued together from three parts, as in the photo, the gluing line is indicated in green.
When the air intakes are ready, you can glue them to the body; the gluing line is indicated in orange.
Then glue the keels according to the red line.
When the glue under the fins is almost dry, you need to move them slightly (1 - 3 mm from a flat position) at the top, this will give the plane better stability in the air. This can be done simply by inserting a stick of the appropriate size between the keels for a few minutes. Next, we need to make the fuselage, which consists of rear and front parts, each of them divided into lower and upper. Let's draw the details, cut them out and sand them with sandpaper. Part number three must be made in duplicate. Now that all the components are ready, you can start gluing them together.
Colored lines should be used in the same way as the previous details. The fighter is ready.
It can be decorated in camouflage style, or any other, depending on your personal wishes.
However, such a model cannot yet fly, because it has low weight and an uneven distribution of this weight throughout the body. In order for an airplane to glide, it must be balanced. This can be done experimentally by gluing pieces of plasticine of different sizes to the nose of the plane. The place where you need to load the model is shown in the photo.
If the fighter glides smoothly, the amount of cargo has been chosen correctly.
A properly made model can fly about 25 meters. If there are problems with starting the plane, then literally 5 - 15 minutes of training, and everything will be fine.The plane will give you and your children an unforgettable experience. Have a successful flight!
With respect, brothers Vinogradny.
