For work we will need:
- corrugated paper.
- threads.
- scissors.
- glue gun.
- wire.
- cotton wool.
- wrapping paper.
- tweezers.
To make a daffodil, we will need corrugated paper in three colors: white, yellow, green. Let's start working with white paper. We will make petals from it. We cut strips along the fibers 1 cm wide. We cut this strip into rectangles measuring 1x6 cm. This will be one petal. For the daffodil we will need 6 petals.
We take our blank and cut the edges so that we get a petal like this. To do this, we will need to cut off the corners at the top of the petal so that we get an oval pointed petal. And from the bottom, we cut off a little edge, but leave it straight.
Let's start making the center of the flower. To do this, take yellow paper. Cut out a square measuring 10x10 cm.We will do all the work with corrugated paper along the fibers.
We bend this square at the top 1 cm along its entire length. This fold will be inside the flower.
Using tweezers, stretch the edges of the square on the fold. We make it so that we get a wavy edge.
We make a depression in the middle of the square with our fingers. The most important thing is that the fold and the recess are on the same side.
We take cotton wool and tear off a piece. Roll it into a ball. This will be the middle of the flower. Instead of cotton wool, you can take foil or round candy.
We place our ball in the recess in the square. Gradually and carefully roll it into a tube. This will be the middle of our flower.
Using nitons, we tie the bottom of the tube so that there is a tail at the bottom and a wavy edge at the top. Carefully straighten its edges. And where the cotton wool ends, we press the wavy edge with our fingers. Squeeze between the cotton wool and the edge.
It's time for the petals. We take the petal and stretch only its edges, without touching the middle. When the entire top has been processed, we proceed to the bottom part. We stretch it slightly in the same way as we will attach it to the base, that is, to the middle. We process all the petals for our flower in this way.
We take the first petal and tie it to the middle using threads. We tie everything tightly so that it does not come undone. We will tie each petal separately.
We tie all the other petals in the same way, in order.
When all the petals are attached, then we straighten each petal. We also correct the middle of the flower. Our flower is almost ready.
It's time for the leaves and green crepe paper. Cut a strip measuring 0.5x10 cm. This will be a blank for the leaf.
We make a narrow, long and pointed sheet.To do this, cut off the edges of the workpiece.
We tie the leaf to the flower itself with threads. The flower itself is ready.
Now we have prepared all the flowers needed for the bouquet. We have 9 of them.
All that remains is to make the stems for our flowers. To do this, take green paper and cut a strip measuring 1x10 cm, cut it across the grain. Stretch it all the way. We take the wire and glue it to the flower with a glue gun. We begin to wrap the stem. Bend the wire so that the flower bends slightly downwards.
We wrap paper around the entire wire. We got such a flower with a stem. We do all the other flowers in the same way.
Take wrapping paper and cut a strip of 50x100 cm.
Fold the front edges to form a triangle. This will be the packaging for our bouquet.
We begin to collect the bouquet. We arrange the flowers so that it is beautiful. To prevent the bouquet from falling apart, we will cover it with a strip of paper.
Cut a strip of wrapping paper for decoration.
We wrap the bouquet with our triangle so that the folded corners are on the outside. We squeeze the paper on the stem of the bouquet and tie it with threads. The final touch remains, we tie the thread with the prepared strip for decoration. Tie it in a knot and make a bow on top. Our bouquet is all ready.
Good luck to all.
