It is worth saying the following about the process of assembling the Christmas tree. The kebab stick is placed in a glass or pot. It is fixed in various ways. Plaster, polyurethane foam, pebbles, cereals, sand, paper. Specifically, in this master class, a glass candlestick was used. It is completely filled with wax and therefore there were no problems with securing the spruce trunk.
The floors were held on a stick without glue, since the corrugated paper blanks were well fastened together in a circle. And they are strung very tightly onto a kebab stick. If you are afraid for the structure of the spruce, you can drop some glue and use it to fix the position of the floors.
1. We will need:
• Corrugated paper.
• Scissors.
• Kebab stick.
• Ruler.
• Stapler.
• Threads.
• Glass.
2. Cut the corrugated paper into 2 rectangles. Each size is 25 by 20 cm.
3. We begin to bend the paper alternately in different directions, then outward and inward.
4.It turns out to be such an accordion. Its width is almost 2 cm.
5. Cut off the corners like this.
6. Bend in half.
7. Fasten with a stapler.
8. It turns out like this circle.
9. Prepare the second rectangle in the same way.
10. We connect both blanks with a stapler.
11. We strengthen the middle of the two blanks with double thread. Just tie a knot on the reverse side.
12. We prepare 8 such blank floors. The diameter of the bottom blank is 25 cm, and the top one is 5 cm. The width of the accordion for the lower floor was 2 cm, the width of the accordion for the upper floor is only 0.5 cm. Reductions can be made by eye, without exact calculations. A couple of millimeters here, a couple here, it won’t affect the overall appearance of the tree.
13. Thread the workpiece onto a kebab stick.
14. Next, stepping back 1 or 1.5 cm from the bottom floor, we string the next largest circle.
15. This is what the finished Christmas tree looks like. View from above.
16. The fluffy and stylish forest beauty is ready.
