To decoupage foam balls you need to take:
- Five plastic balls with a diameter of 5 cm;
- Napkins for decoupage with small New Year's elements: wreaths, birds, Santa Claus, Christmas trees, houses, etc.;
- Acrylic white red (take Snezka company);
- Acrylic varnish for decoupage;
- Ceramic plate;
- Foam sponge;
- PVA glue;
- Satin ribbons 3 mm wide in different colors;
- Dry glitter white and gold;
- Wooden sticks;
- Plastic bag;
- Scissors;
- Lighter;
- Plastic star decorations.
The working surface of the table should be covered with a bag. Remove the caps with hooks from each ball and set aside for now. Pour acrylic paint into a ceramic plate, take a sponge and begin to paint each ball with it.
We put the colored ball on a stick and can place it in a glass or vase until it dries. We paint all five balls this way.
After the first layer has dried, paint the balls with a second layer. We also then put the balls on sticks and set them until they dry.
In the meantime, you can do some pictures. We take different napkins and carefully remove the topmost layer from each.
And we tear off various small elements. We wash off the paint from the plate and dilute PVA glue in it, approximately mixing in equal proportions.
Take a ball, place a small picture on it and carefully apply the adhesive mixture to the picture with a sponge.
So we paste the pictures all over the surface of the ball.
We put the same stick on it and take the next ball. So we decoupage all five balls. Now leave them until completely dry. To strengthen the picture and shine, we will now cover the balls with layers of acrylic varnish. Rinse the plate and pour in the varnish. You should not skimp on the varnish and apply many layers, but ensure that each previous one dries well.
In total we apply 5-6 layers of varnish, you can add dry glitter to the last layer and cover the balls with this mixture.When finished, they will shimmer beautifully.
We cut off five 20 cm ribbons and burn the edges with a lighter. We put the hats on the balls, thread the ribbons and tie knots on the loops. You can dot dots with liquid glitter on dry balls.
Thanks to the glitter and sparkles, the balls shimmer well in the light, so they will sparkle very beautifully on the Christmas tree. All the balls are ready, we get this interesting result! Thank you everyone for your attention.