Necessary materials:
- sheets of white, brown and yellow paper;
- bulky double-sided tape on foam;
- scissors;
- stapler with staples;
- office glue;
- black felt-tip pen;
- a simple pencil;
- ruler.
Stages of making a paper donkey:
1. Like any donkey, our Eeyore will have a brown body color. So you should take double-sided paper of this color and cut out a rectangle 13 x 8 cm.
2. Next, use your fingers to roll the rectangle into a tube.
3. Holding the edges, secure them with a stapler.
4. Making legs for the donkey. To do this, you need to cut 4 strips of 1 x 2 cm.
5. Glue two strips in front on the inside of the body, and the rest on the back side.
6. Making a shaggy bang. Cut it out of brown paper. We glue a piece of double-sided tape on top of it on the foam.
7. Attach the bangs to the very top of the body.
8. Cut out two small ovals from white paper. Using a black felt-tip pen, draw two circles on them. We got eyes.Glue the finished eyes onto the donkey's body just below the bangs.
9. Cut out a large oval from yellow paper. Using a black felt-tip pen, draw the nostrils.
10. Glue it to the body, having previously attached a piece of double-sided tape on the foam to the back.
11. Making ears. To do this, draw the silhouette of the figure, as shown in the photo. Then carefully cut it out with scissors.
12. Make one cut on each side of the body from the top side.
13. Insert the ears.
14. All that’s left is to make the donkey’s tail. So take a sheet of brown paper and cut out two parts: a thin strip and a leaf-shaped figure.
15. Connect the figures together with glue. We attach the finished tail to the back of the body. So our colored paper donkey is ready.
