Sometimes there is a need for new jewelry, and the best solution is to make something new with your own hands! You can diversify your look and complement clothes with blue and black colors. This pendant is especially suitable for a dress.
To make such a pendant you will need hematite 3 cm long and with a hole inside the stone, also beads with a diameter of 4 mm, a thick wire with a diameter of 1 mm and a length of 12 cm, then a thinner wire with a diameter of 0.7 mm and a length of 8 cm and a thin wire with a diameter of 0.1 mm 50 cm long.
1. First, we use a thick wire to create the base of our pendant: to do this, we place our black hematite stone on the wire, leave the end of the wire 3 cm long and bend the wire on the left around the stone. Then we move from point 1 to point 2: to do this, we make a loop around the remaining free end of the wire and bend the wire to the right of the stone. You can also bend it by hand, since the wire is copper and quite soft. At the end we use round pliers to make a beautiful bend, like a treble clef.
2. After this, we wrap the remaining end of the wire with round nose pliers so that a loop is formed for hanging our pendant.
3.We beautifully bend the wire around the loop and cut off the unnecessary
4. Now it’s the turn of the thinner wire: bend the loop at the base with round pliers and string the beads onto it. Using the thinnest wire, we attach a thinner wire to the base of the pendant with 2-3 turns and for beauty under the beads, 5 turns.
5. Then we go through this until the end. The result is visible in the photo. At the end, we make a small loop at the end of the thinner wire, the same as at the beginning.
6. We wind the thinnest wire onto a curl in the form of the end of a treble clef
