Recipe:
- 1 cap of fabric softener;
- 5 liters of clean water.
How to use
You need to mix 1 cap of rinse aid per 5 liters of water. In this case, Lenor is used, but you can use something else.
Shake the mixture thoroughly and pour it into the windshield washer reservoir.
After this, you need to spray the product on the glass and turn on the windshield wipers. They will rub the anti-rain over the entire surface, making it hydrophobic.
When raindrops hit, they begin to roll off the glass without freezing in place. This effect is especially noticeable while driving. Drops run away from the glass almost instantly even at a speed of 60 km/h. The higher the acceleration, the faster the smudges disappear.
As the rinse aid is washed off, the hydrophobic qualities of the glass decrease. In this case, you just need to start the windshield washer nozzles and apply another portion of the product.
Precautionary measures
- The product is only suitable for use in rainy weather. When it's dry, many rinses evaporate and create an iridescent or white film on the glass, which you then have to manually wipe with a rag. Therefore, it is important not to spray the product in advance of the rain.
- Also, you should not prepare homemade anti-rain with a large supply. The fact is that over time, the rinse aid in water loses its qualities. Gradually it settles to the bottom in the form of white flakes. Of course, this does not happen within a few days, so the product in the windshield washer reservoir will not have time to deteriorate.
Watch the video
We also recommend a useful life hack: how to make an inexpensive antifreeze with your own hands - https://enn.washerhouse.com/5697-bjudzhetnaja-nezamerzajka-svoimi-rukami.html
