Large sheets of plywood or OSB are very difficult to transport alone due to their size. To simplify this process and save effort and time, consider 3 homemade devices that will help one person move sheets without unnecessary complications and red tape.
3 attachments for carrying large sheets alone
Let's start with the simplest and end with the most difficult.
Method 1: use a rope
For it you will need an ordinary strong rope, like a clothesline, nylon. If your sheet is, say, 2.5 meters long, then take 6 meters of rope. Fold it in half.
We tie the ends together. Now we slip one loop under one corner of the sheet.
And the second one is under the other one. Now you can pull the rope from the middle and lift the sheet, holding it by the top with your other hand.
Anyone can make such a device very quickly, but it will be difficult to move a large number of sheets with it, since the rope digs into the hand.
2 device
Further, the design is more complicated, but more effective. You will need: a piece of round stick, a piece of rope, a metal hook.
We wrap the piece of wood with rope and attach the other end to the hook.
Using this device, it is much faster and easier to transport sheets over long distances and does not rub your hands.
3 device
Now the most convenient device, but not the fastest to manufacture. It will take a lot of time, so it’s definitely not worth bothering with it because of 3-4 sheets.
The device also consists of a rectangular board, in the upper part of which there is a window under the arm.
A slant with a bevel is screwed onto the bottom using self-tapping screws.
The device is slipped under the sheet and lifts it. Very comfortably.
Which design to choose is up to you! Bye everyone!
