Will need
If you need to remove a seam in a round pipe, then an unusual type of device is required. To make it you will need:
- turning blank;
- welding electrode with core hardness 60-62 HRC.
Tool for removing seams in round pipes
It is necessary to grind a cylindrical blank that fits tightly inside the pipe. One side of it is chamfered in a circle. The worn surface is restored by welding. For this purpose, use a UTP 711-B electrode with a hard steel rod or an equivalent.
The seam on the welded blank is worn away.
It is then inserted into the tube and pressed through it with a press.
The cutting edge created by the electrode will easily remove the seam.