Materials:
- aluminum strip;
- trapezoidal replaceable blades - 3 pcs.;
- M4 screws – 6 pcs.;
- blank for handle.
Knife making process
We cut out a blank from an aluminum strip in the shape of a blade.
It is necessary to make a marking on it for 3 trapezoidal interchangeable blades, and select the metal using it using a drill. It is important that the cutting edges of the blades protrude from the aluminum base and the edges practically meet together.
On the smooth side of the workpiece, a bevel is made using sandpaper.
Next, it is drilled through the standard holes on the blades, then a thread is cut into it to screw them on.
The blades are screwed on.
The protruding part of the thread on the reverse is ground off.
The base itself needs to be polished. If there are scratches on it, then dirt will stick to it.
Finally, an overhead handle is made.
It can be secured with screws or rivets.
The resulting knife is ready for its intended use. In the future, when the sharpness is lost, its blades change.
Watch the video
The information is provided for informational purposes only. The manufacture of bladed weapons is punishable by law.