Do it yourself
Life hacks, master classes, useful tips, recipes.
home » Homemade cars "How to make a miniature and sensitive FM receiver antenna from a marker instead of a long wire
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

Operating an FM receiver whose antenna is a meter-long piece of wire is not always convenient, and in some cases, sometimes impossible. To add comfort when listening to the radio, the author of the channel “Valery Samodelkin” shows how to build a miniature, helical FM antenna that is highly sensitive, looks stylish and does not cause trouble in its placement.

Will need


  • Permanent marker.
  • Bolt 6x150.
  • 2 nuts and 1 connecting nut.
  • Heat-shrink tubing.
  • Insulated wire 77 cm long (distance 1/4 wavelength of the FM range).
  • Protective cap for the light bulb base (they are thrown away when purchased).

How to make an FM antenna from a marker yourself


Take a marker and use a utility knife to trim the top of the cap.
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

As a result, the upper wide ring falls off and a pointed surface appears.
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

We disassemble the body and remove the paint rod. We cut the writing tip and remove it.
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

The assembly kit is ready.
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

We drill the bolt with a 2 mm drill in the middle.We put heat shrink on it to cover the part from the cap to the hole.
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

We insert the bare part of the wire into the hole and twist it for good contact. We wind the insulated part of the wire turn by turn onto the bolt on the side with heat shrink.
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

We will drill the back cap from the marker and the protective cap from the light bulb in the center for the bolt.
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

We assemble the antenna. Insert a bolt with a wound wire into the marker body.
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

Fix it with a nut.
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

On one side we glue a narrowed cap with super glue, and on the other we put on a light bulb cap and secure it with a long nut.
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

Use a solvent to erase the name from the body.
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

We paint everything black.
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

We install it on a motorcycle.
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

The reception is great! Even turning the steering wheel does not interfere.
How to make a small and sensitive FM receiver antenna from a marker instead of a long one

This antenna is much more sensitive than a regular long piece of wire.
Such a mini antenna can be made not only for a motorcycle, but also for a car or simply for a home music center.

Watch the video



Also read how to make a miniature and sensitive antenna for a Wi-Fi router - https://enn.washerhouse.com/3856-prostaya-vsenapravlennaya-antenna-3g-4g-wi-fi.html
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (2)
  1. swift
    #1 swift Guests 22 February 2021 15:19
    3
    and the antenna mounting bracket is insulated from the steering wheel or a plastic bracket
  2. Alexander
    #2 Alexander Guests November 9, 2022 02:30
    1
    video about painting with a felt-tip pen and winding wire onto a bolt! What wire? How and what and where to connect? Well, I made this blank, but I don’t understand why there is insulation on the bolt if the stripped wire fits into the bolt hole, which wire is antenna or single? And where, in short, alien technology, obvious but incredible!

How to make a very simple metal detector using 2 transistors

How to clean carbon deposits from a grill grate without extra effort

2 accessible ways to control aphids on cucumbers

How to eliminate squeaking and poor cleaning by car wipers

«Do it yourself - with your own hands» - a site of interesting homemade products made from scrap materials and items at home. Step-by-step master classes with photos and descriptions, technologies, life hacks - everything a real master or just a craftsman needs for needlework. Crafts of any complexity, a large selection of directions and ideas for creativity.

We recommend reading

Washing machine error codes