Do it yourself
Life hacks, master classes, useful tips, recipes.
home » Electronics » How to make a battery with voltage regulation up to 36 V

There are many necessary useful electronic devices and devices that require a voltage of 5, 12, 24, 36 V to power them. A regular power bank is not enough for charging smartphones. If you use different devices with a rated voltage of up to 36 V, then you can assemble a regulated battery for them with your own hands.

Materials:

Battery manufacturing process with output voltage regulation

To make a battery box, you need to cut 2 parts from sheet plastic measuring 23x33 mm, 2 - 33x74 mm, and 2 - 26x74 mm.

They need to be connected into a box, leaving one wall open. It is very convenient to glue parts by first securing them with electrical tape.

The battery is placed in the box, and the charge controller is placed on the side.

You need to mark the location of its connector on the walls and cut a hole to access it.

2 wires are soldered to the controller contacts.

The wiring needs to be soldered to the battery.

The battery is then isolated.

The battery and controller are placed in a box and fixed with hot glue.

Next you need to work on the box lid. A hole is made in it for the voltage adjustment screw of the converter.

You also need to cut through the cover for the terminals.

They themselves can be made from a copper tube by cutting it lengthwise, leveling it and spreading it into strips.

The terminals are bent and glued into the cover.

Next you need to tin them.

The converter is glued to the bottom of the cover.

Its contacts must be connected to the terminals and the controller.

All you have to do is glue the cover in place, and the battery is ready for use.

The regulated battery is charged from a conventional 5 V unit.

By rotating the adjusting screw, you can adjust it to different voltages from 3.5V to 36V.

Let's set the output to 4 V.

Let's set the output voltage to 12 V.

And at the end we will set it to a maximum of 36 V.

Everything works perfectly.

Watch the video

How to make a flashlight with a generator from a syringe - https://enn.washerhouse.com/6681-kak-iz-shprica-sdelat-fonarik-s-generatorom.html
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (1)
  1. Freezing
    #1 Freezing Guests August 28, 2021 07:50
    0
    I forgot to put the toggle switch, since the converter consumes current even in idle mode. The battery will be constantly discharged.

Primitive electric motor | Do it yourself

An easy way to grout tiles | Do it yourself

Gift wrapping | Page 2 | Do it yourself

How to make a dryer for vegetables and fruits from a leaky pan

«Do it yourself - with your own hands» - a site of interesting homemade products made from scrap materials and items at home. Step-by-step master classes with photos and descriptions, technologies, life hacks - everything a real master or just a craftsman needs for needlework. Crafts of any complexity, a large selection of directions and ideas for creativity.

We recommend reading

Washing machine error codes