Electric motors of tools equipped with soft start last much longer. Unfortunately, its presence significantly increases the cost of the equipment. If your drill, circular saw, grinder or jigsaw does not have a soft start, then make this extension cord to connect them.
Materials:
- Power cord with plug;
- cable socket with cover;
- soft starter unit 15 A (or 20 A) - at a discount http://alii.pub/604f40 (or here - http://alii.pub/604f56)
- insulating tape.
The process of manufacturing an extension cord with soft start
To make an extension cord, it is necessary to disassemble the casing of the cable socket. A power cord with a plug is passed into it from the reverse side. One wire of the power cord is twisted with the soft start wire. Then the remaining core from the cable is connected to one contact of the socket, and to the second from the soft start unit. Connections are isolated. For reliability, it is better to solder the twist before doing this.
The socket body is assembled.
After this, the extension cord is ready for use.
By connecting a power tool through it, you are guaranteed to extend its life and make work more comfortable.
