To work you will need:
• Sewing machine.
• Black, red and white sewing threads.
• Needle.
• Good scissors.
• Thick black fabric.
• White cotton fabric.
• Sheet of paper A 4.
• Pen.
• Tape measure.
• Thick black elastic.
• Black trim.
• Safety pins.
Procedure
1. Make a pattern. Draw an oblong shape as shown in the photo, approximately 9 cm wide and 21 cm long. Fold the sheet in half and carefully cut out a symmetrical pattern.
2. Place the pattern on black fabric. Pin with safety pins and cut out. Do the same on white fabric. If the black fabric is too thin, cut out several more of the same blanks to fold them in layers.
3. Cut out the same piece from white fabric.
4. Cut out three pairs of different sized circles for the panda’s eyes and a small circle for the nose.
5. Sew large circles using a sewing machine.
6.Sew medium-sized circles.
7. Sew small circles for the eyes and nose. Sew the mouth with red thread.
8. Sew the two mask pieces together.
9. Measure and sew the elastic.
10. Using a sewing machine, sew the trim to the inside of the mask.
11. Turn the tape inside out and baste it along the contour of the mask.
12. Sew the trim to the mask from the front side.
13. Cut two circles from black fabric with a diameter of 4 cm.
14. Fold the circles in half and trim the edges with tape.
15. Sew the ears to the mask. Ready!
