- Patterns, I took from the Internet;
- Rubber;
- Fleece, I took leopard print;
- fleece for the inside of the boot, I took light green;
- Sintepon;
- Black fleece - for toe and heel;
- Leather, for the foot;
- Light green threads;
- Threads are black.
1. First of all, before we start sewing cozy slippers, we need to cut out all the details we need. We take patterns and start cutting according to them. We take the main part of the pattern and cut it from leopard fleece, but since I decided to make high slippers, we increase the height of the pattern by 30 centimeters from the instep of the foot on this part. These are the details you get. From this main part we cut off the heel (by eye).
2. The sock part should also be divided, since the sock will also be black. We cut out the details of the toe and heel.
3. We cut the feet from leather and light green fleece.
4. Based on the pattern of the main part, we cut a part from light green fleece, but with a height of not 30 cm, but 20 cm from the rise and without cutting off the heel.
5. Cut the sock from light green fleece, also without cutting off the sock.
6. We cut out exactly the same parts from padding polyester as from light green fleece.Foot, Toe and main part.
7. Let's start assembling our product. First of all, we sew the padding polyester to the parts of the inside of the boot. Sew to the sock.
8. Sew the padding polyester to the foot.
9. All that remains is to sew the padding polyester to the main internal part of the product.
10. Now we begin to sew together the parts of the inside of the product. that is, we take the sock and sew it with the main part of the boot.
11. Fold the resulting part in half and sew the seam, leaving the opening unsewn so that you can later turn the product inside out.
12. Sew on the sole.
The result was a boot for the inside.
13. Now we take the main part of the leopard fleece and draw lines on it at equal distances. We will sew rubber to these lines. so that our boot tightens in these places.
14. We cut pieces of rubber, 1 piece of 29 cm, and 2 pieces of 26 cm. These dimensions are taken from the calculation of our boot. That is, its width is 32 cm. We sew the long rubber on top, since the leg is wider on top. than the ankle.
15. Sew the rubber along the drawn lines, while stretching it. This is what we got.
16. Sew the sock. We take the black part of the sock and the leopard print one and sew them together. First I chipped it with needles. for ease of sewing.
17. So that the seam does not interfere with walking, we sew it to the part with a finishing seam.
18. Sew the resulting part with the main part.
19. Fold in half and sew the back seam.
20. Sew the black heel to the resulting material. And we sew the finishing seam in the same way.
21. Sew on the leather foot.
22. Now we sew the inner and outer boots.
23. We make three fastenings in the toe and heel to make it easier to remove without the inside getting loose.
24.Turn it right side out and sew up the opening.
25. We sew the finishing seam so that the inner boot does not bunch up.
We make the second slipper in the same way.
Homemade warm felt boots are ready! Warm and cozy days and evenings to you!
