Fortunately, everything can be fixed if you have any sewing machine and you have minimal skills in operating it.
One of the conditions for success is to choose the right threads. Threads are suitable for regular polyester No. 40. The choice in sewing accessories stores is very large. For example, “Ideal” or “Dor tak”. We'll select it like this. Let's choose a suitable color, wind a little bit of thread on your finger, and apply this “winding” to the fabric. The two colors should be almost the same, then the darning will be almost invisible.
We will also need adhesive fabric. It is sold in fabric stores and is quite inexpensive. Comes in white and black.
Now turn the jeans inside out. We cut out pieces of adhesive fabric and apply them to the places where we will do the darning.
We glue our blanks. This will make the darning process easier.The iron must be hot enough. The side with glue is rougher to the touch. Place the patch with the adhesive side on the jeans and slowly iron the pieces, pressing them well. Wait a minute, let it cool and set well.
Darning can be done on any household machine using reverse (reverse motion); even the oldest sewing machines have this function. Set the stitch length regulator to 2.8 -3.0 mm.
We darn slowly at first. Let’s “block” the impulse with a wide zigzag, similar to a cardiogram, moving the line forward and backward. The edges of our “cardiogram” should not be smooth, then the darning will be less noticeable and more natural.
Now we darn very carefully the place of the gust itself and the neighboring areas. If it is inconvenient to darn with large lines, work with small sections, connecting them with smooth transitions. If white threads are knocked out between the lines, point the needle directly at them until they are noticeable. By the way, if the gust is large and there are a lot of threads sticking out, you can trim off the excess, but do not cut off all the threads until there is a complete hole; it is better to leave the base. Although restoration is possible even with the complete absence of threads, it is a little more difficult.
IMPORTANT: the darning will look more natural if you sew in the direction of the pattern, and not in the direction of the hem of the fabric!
Sew carefully, in parallel, without rushing. The result will please you. The skill will gradually appear, and the process will take you no more than 15 minutes. Once the darning is done, turn the jeans inside out and trim off any excess glue.
After the job is completed, the jeans should be steamed using water and cloth. Your diligence will be rewarded. Jeans will last you a long time.It’s especially nice when your family looks at the completed work for a long time and cannot immediately find the darning)
