Glasses for a wedding in lilac color with your own

It is always fussy and quite difficult to prepare for a wedding. After all, you always want to do better than others. So that everything goes without a hitch. Nowadays, quite a lot of couples who are going to get married turn to special wedding salons for help, where specially trained people help them decide on the color of the wedding, the decor, and the full design. Other people prefer not to delegate, or even one might say, not to entrust absolutely everything about wedding planning to people they don’t know very well, but to do the bulk of it themselves. Then you will definitely be confident that everything will go the way you want and it was you who did it. For example, each girl can prepare wedding invitations and glass decoration herself. Now we will learn how to decorate wedding glasses in lilac color with our own hands.

To make glasses we will need:
• Two clear champagne glasses:
• Rhinestones with a hologram sheen with a diameter of 5 mm, we will need about 150 pieces;
• Glue gun with a 7 mm stick (you also need to choose a good glue stick so that it doesn’t spread when gluing the rhinestones);
• White and beige latex roses;
• Paper roses of purple, white and lilac colors with a diameter of 10 mm and 20 mm;
• Satin lilac ribbon 25 mm wide;
• Thin satin ribbons, white and purple;
• Metal pendants of a pair of hearts;
• Heart cabochon centers of silver color;
• Bouquets of complex stamens are white and lilac;
• Scissors, glue, lighter.



The decoration of this type of glasses consists in the partial use of phrases. We will not glue rhinestones thickly and sloppily. We pour rhinestones on the table, turn on the gun, heat it up.


We begin from the bottom up, evenly gluing the rhinestones at a distance of approximately 1 cm. Glue 8-9 rhinestones onto the strip. We glue 5 strips of rhinestones onto one glass. For the pendants, we need to cut two thin strips of ribbon, fold them in pairs, thread them into the pendant and tie bows.


We covered both glasses, now let’s decorate the round bottom stand a little.


Glue two circles in a circle at the same distance. We burn the edges of the bows.


Now we need to wrap the very top of the leg, the place where we started gluing the rhinestones, with tape. We take a wide ribbon, fold it in half, wrap it a couple of times and glue the tip with a gun.


Now we cut two pieces from a wide lilac ribbon, burn them, and tie bows.


We need to make small bouquets from flowers and stamens. We will have three flowers and two bouquets of stamens per bouquet. We twist them together and form a bouquet. Now, using a gun, we glue onto the place where we wrapped the glass, first a large bow, then a bouquet, and on top of the bouquet we glue a bow with a pendant. We do the same on the second glass.We also make bows from a thin ribbon on the back of the glass, and glue silver hearts in the center.


The glasses are ready, they look chic, stylish and original, and most importantly, very beautiful. Thank you for your attention!