Do it yourself
Life hacks, master classes, useful tips, recipes.
home » Garden » How to make a huge pool for almost nothing

You can plant your plot with trees and potatoes and then constantly spend energy caring for them, or you can use the territory in a more interesting way, for example, by digging a swimming pool. It's not as expensive as it seems. You can even spend it on it construction literally pennies, and then spend the whole summer swimming in warm water for days on end.

Materials:

  • Edged board;
  • timber 50x50 mm;
  • nails;
  • wire;
  • used PVC banners;
  • polyethylene film;
  • Staples.

Pool construction process

Once you have decided on the size of the pool, you need to mark its boundary on the site. Pegs from the slats are driven into the corners. To make the pool bowl rectangular, the distance between them must be equal on both diagonals.

Boards are screwed or nailed to the pegs. It is required to assemble a box with a height of 60 cm. The rows of the frame are additionally connected by slats. You will also need to check the level of the box so that when filling the bowl with water, some sides do not end up higher than the others.

Then you need to hammer stakes outside the frame and tie them to the box with wire braces.This is necessary so that the soil does not squeeze it into the pit until water is poured in.

After this, you need to dig a pit in the box. At the same time, the earth is thrown over the sides to cover them. Stretches will allow the box not to bend under the weight of the soil.

Then you should sheathe the frame from the inside of the used banners to smooth out the sharp corners of the boards and the steps between them. Instead of advertising tents, white bags, agrotextiles and other similar materials are suitable.

The pool is sealed with thick polyethylene film. To do this, you need to roll it out and solder it. It is soldered with a regular iron through fabric. To do this, the film is folded overlapping and ironed at the junction from above.

The finished large canvas is placed on the bowl, straightened into the corners, after which the edges are pressed down behind the sides with boards. The pool can then be filled with water. While it accumulates, it is better to cover the soil with mulch or turf. This is necessary so as not to create a swamp from splashes.

In a couple of days, the water in the pool will warm up and you can swim in it comfortably. To prevent algae outbreaks, you should throw pool tablets into the bowl; they will prevent the water from turning green. A budget filter wouldn't hurt either. You can do it yourself. The price is an aluminum can, a circulation pump for heating, sand and a couple of meters of hose.

Watch the video

Be sure to watch the video with all the nuances of building a pool with your own hands.

come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (0)

Lifehacks and useful tips | Page 20 | Do it yourself

Men's cards | Do it yourself

Origami paper box in the shape of a cat | Do it yourself

Breaded fried cheese

«Do it yourself - with your own hands» - a site of interesting homemade products made from scrap materials and items at home. Step-by-step master classes with photos and descriptions, technologies, life hacks - everything a real master or just a craftsman needs for needlework. Crafts of any complexity, a large selection of directions and ideas for creativity.

We recommend reading

Washing machine error codes