But there is a way out and it is very simple, although additional parts and mechanisms will be required.
Aligning the thick wire
So, you need to find a log, a piece about half a meter in length. In it, closer to one of the edges, we drill a through hole with a diameter larger than the wire itself.
Next, insert the end of the wire into this hole.
The other end of the log must be wrapped with a cable and secured with a tie.
The second end of the cable must be attached to a reliable support, such as a concrete pillar. And at the end of the wire, put an ear clamp with a plate in which there are two holes. We bend the wire and insert the snake into these holes.
Next, this clamp is placed on the car's towbar.
And now, using a machine, we pull the wire through the hole in the log at an angle.
As a result of these actions, the wire will be perfectly straight.
Watch the video
Be sure to watch the short video to clearly see the whole process.