Many car enthusiasts have several unnecessary tires that have nowhere to use. You can make a simple but convenient bench from them. To do this, you need to prepare tires, wooden beams or boards, a drill, a grinder and bolts.
Preparing timber for the bench
If you have old boards, you can use them. If they have time to rot, then it is better to purchase a new beam. Next you need to adjust it in length and width.
If possible, you can use a sawmill or circular saw. When the length of the tree is the same, you need to retreat 3 cm on each side. Using this marking you need to drill holes for the bolts. At the end of the work, you need to sand the timber so that there are no snags and to avoid tearing your clothes.
Assembling a bench from tires
On the ground, you need to lay out the tires in a triangle, with the bottom two being at a short distance from each other.
All of them need to be fastened with strips and bolts so that they provide the necessary rigidity to the bench. First of all, you need to screw the top and bottom boards to expose the tires.To attach the timber, you need to use a drill - you need to drill holes in the tires to insert connecting bolts into them.
The timber installation step can be selected based on the quantity of timber.
It is better that it is no more than 2 cm. When all the beams are screwed, they can be treated with varnish, drying oil or simple paint.
High-quality and durable drills on AliExpress at a discount - http://alii.pub/5zwmxz
